Printronix SL5000r MP manual Requesting An RFID Report, Custom Max Power, EPC Mgr Report

Chapter 2 Requesting An RFID Report

Custom Max Power

The menu item determines the maximum power level that the calibration procedure will use when attempting to find the ideal power level. To make the calibration work faster, decrease this value to exclude the higher power levels. The default is 20.

EPC Mgr Report

This menu item enables EPC and label information to be sent out the network port. This information can be used by an RFID tag data and labels manager program. The default is Disable.

Non-RFID Warning

When this menu item is set to Enable, the printer checks to make sure that non-RFID jobs are not being printed on RFID labels (to prevent RFID labels from being wasted).

If RFID labels are installed in the printer, and a job is printed with at least one form that contains no RFID commands, a fault will be declared and the data for the forms that contain no RFID commands will be absorbed.

The default is Disable.

Requesting An RFID Report

This procedure prints a summarized RFID report. (This report also includes validator data if the printer has a validator.)

1.Press the PAUSE key to take the printer offline.

2.If necessary, press ↓ and ↵ at the same time to unlock the ↵ key.

3.Press TEST PRINT. Printer Tests displays.

4.Press + until ODV/RFID Report displays.

5.Press ↵ to print the report.

6.Press ↓ and ↵ at the same time to lock the ↵ key, then press PAUSE to take the printer offline.

7.Press PAUSE again to put the printer online.

34