Printronix SL5000r MP manual Read Tag, Format RDIposition,length,format, Rdi, Position

Chapter 2 RFID PGL Commands

(D)Delimiter designating the start and end of static data for the RFWRITE field. Replace (D) with any printable character, except the SFCC and “/” (the slash character).

datafield The static data of the RFWRITE field.

NOTE: RFWRITE fields are not expandable in VDUP and/or

HDUP sections.

Read Tag

IMPORTANT This command is still supported but no longer in development. We recommend you develop your application using the RFRTAG command as defined on page 45.

Read Tag is not a command, but an element of the ALPHA and BARCODE commands. See “Alphanumerics” and “Bar Codes” in the IGP/PGL Programmer’s Reference Manual for more information.

Purpose Embed RFID data into an ALPHA or BARCODE data field.

Format <RDI>position,length[,format];

<RDI>	The RFID Data Indicator character, as
	defined by the RFREAD parameter in the
	ALPHA or BARCODE commands. See
	the ALPHA and/or BARCODE command
	description for details.
position	The decimal number that specifies the
	starting position of the data inside the
	transponder.
length	The decimal number that specifies the
	length of the data to be read.
format	Replace the optional format parameter
	with any non-zero number to convert the
	data to hexadecimal format.

54