Checking Memory Installation

Follow this procedure to verify that DIMMs are installed correctly:

1 Check that the printer’s control panel displays READY when the printer is turned on. If an error message appears, a DIMM might have been incorrectly installed. Check the printer messages (page 103).

2Print a new configuration page (page 134).

3Check the memory section on the configuration page and compare it to the configuration page printed before the DIMM installation. If the amount of memory has not increased, the DIMM might not be installed correctly (repeat the installation procedure) or the DIMM might be defective (try a new DIMM).

Note

If you installed a printer language (personality), check the Installed

 

Personalities and Options section on the configuration page. This

 

area should list the new printer language.

 

 

EN

Printer Memory and Expansion C-5

Page 229
Image 229
HP 4050 manual Checking Memory Installation, Area should list the new printer language, Printer Memory and Expansion C-5