Printer Messages (Continued)

Message

Explanation or Recommended Action

 

 

UNSUPPORTED SIZE

An external paper handling device detected an unsupported paper

IN TRAY [YY]

size. The printer will go offline until the condition is corrected.

 

 

USE [TYPE]

If the requested paper size or type is not available, the printer asks if

[SIZE] INSTEAD?

it should use another paper size or type instead.

 

Press [- Value +] to scroll through the available types and sizes. Press

 

[Select] to accept the alternate type or size.

WAIT FOR PRINTER TO REINITIALIZE

The RAM disk setting has been changed from the printer’s control panel. This change will not take effect until the printer reinitializes.

If you change the mode of the external device, turn the printer off, turn the printer on and wait for the printer to reinitialize.

WRONG ENVELOPE

The envelope feeder you are trying to install will not work for this

FEEDER INSTALLED

printer.

 

To order an envelope feeder for the printer, see page 8.

 

Make sure the envelope feeder is installed correctly (page 50).

 

 

XX.YY

A printer error has occurred that can be cleared by pressing [Go] in

PRINTER ERROR

the printer’s control panel.

PRESS GO TO

 

CONTINUE

 

 

 

13.x PAPER JAM

Remove jammed paper from the specified location (page 90).

[LOCATION]

Open and close the top cover to clear the message.

 

Open the top cover.

 

Remove toner cartridge and clear all paper from underneath the toner

 

cartridge area.

 

Caution

 

Ensure all jammed paper is removed before opening and closing the

 

top cover.

 

Open and close the top cover to clear the message.

 

If the message persists after all jams have been cleared, a sensor

 

might be stuck or broken. Contact an HP-authorized service or

 

support provider. (See the HP Customer Care Service and Support

 

pages at the front of this user’s guide.)

20INSUFFICIENT The printer received more data than can fit in its available memory.

MEMORY

You might have tried to transfer too many macros, soft fonts, or

alternates with

complex graphics.

Press [Go] to print the transferred data (some data might be lost),

PRESS GO TO

then simplify the print job or install additional memory (page C-1).

 

CONTINUE

 

108 Chapter 4: Problem Solving

EN

Page 130
Image 130
HP 4050 Tray YY, USE Type, Size INSTEAD?, Wrong Envelope, Feeder Installed, Xx.Yy, Printer Error, Press GO to Continue