HP 4050 manual Loading Envelopes in Tray

Loading Envelopes in Tray 1

1 Open Tray 1, but do not pull out the extension. (Envelopes feed best without the extension.)

2 Open the rear output bin and pull out the tray extension. (This reduces envelope curl and wrinkling.)

3 Load up to 10 envelopes in the center of Tray 1 with the side-to-be-printed facing up, and the postage-end toward the printer. Slide the envelopes into the printer as far as they will go without forcing them.

4 Adjust the guides to touch the envelope stack without bending the envelopes. Make sure the envelopes fit under the tabs on the guides.

48 Chapter 2: Printing Tasks

EN