HP 4050 manual Control Panel Menus B-11

Printing Menu (Continued)

Item	Values	Explanation
UNIT OF MEASURE=	INCHES	This item appears only when CONFIGURE
INCHES	MILLIMETERS	CUSTOM PAPER=YES			. Select the unit of
(110V printers)		measurement for the custom paper size.
or
MILLIMETERS
(220V printers)
X DIMENSION=	For supported paper	This item appears only when CONFIGURE
8.50INCHES	sizes, see page A-3	CUSTOM PAPER=YES . Select the dimension
(110V printers)		to be fed into the printer (short edge).
or
216 MILLIMETERS
(220V printers)
Y DIMENSION=	For supported paper	This item appears only when CONFIGURE
14.00 INCHES	sizes, see page A-3	CUSTOM PAPER=YES . Select the other
(110V printers)		dimension (long edge).
or
356 MILLIMETERS
(220V printers)
FORM=60 LINES	5 to 128	Sets vertical spacing from 5 to 128 lines for
(110V printers)		default paper size. Press [- Value +] once
or		to change the setting by increments of 1, or
		hold down [- Value +] to scroll by
64 LINES
		increments of 10.
(220V printers)
ORIENTATION=	PORTRAIT	Determine the default orientation of print on
PORTRAIT	LANDSCAPE	the page.
		Note
		It is best to set the page orientation from the
		printer driver or software application.
		(Driver and software settings override
		control panel settings.)
PCL FONT SOURCE=	INTERNAL	INTERNAL : Internal fonts.
INTERNAL	SOFT	SOFT: Permanent soft fonts.
	SLOT 1, 2, or 3
		SLOT 1, 2,	or	3
				: Fonts stored in one of

the three DIMM slots.

Note

It is best to set the font source from the printer driver or software application. (Driver and software settings override control panel settings.)

EN

Control Panel Menus B-11