HP 4050 manual Control Panel Menus B-15, Resource SAVE= OFF, Pcl Memory=, Ps Memory=

Configuration Menu (Continued)

Item	Values	Explanation
RESOURCE SAVE=	OFF	Dedicate printer memory to save each
OFF	ON	language’s permanent resources. (You might
	AUTO	need to add memory to the printer in order for
		this item to appear.) The amount of memory set
		aside can be different for each installed
		language. Some languages might have
		memory set aside for resource saving without
		requiring all languages to do so. Any time the
		amount of memory dedicated to a specific
		language is changed, all languages will lose all
		saved resources, including any unprocessed
		print jobs.
		OFF: No language resource saving is
		performed, and language-dependent
		resources, such as fonts and macros, are lost
		when language or resolution changes.
		ON: An item will appear for each installed
		language that allows the user to allocate a
		particular amount of memory to that language’s
		resource saving area. (See the items below.)
		AUTO: The printer automatically determines the
		amount of memory to use for each installed
		language’s resource saving area.
		For more information, see page C-6.
PCL MEMORY=	0K and up	This item appears only when RESOURCE SAVE=
400K	(This value	ON. Select the amount of memory used for
		saving PCL resources. Printer default is the
	depends on the
		minimum amount of memory needed to
	amount of
		perform resource saving for PCL. Press
	installed
		[-Value+]to change settings by increments of
	memory.)
		10 (up to 100 KB) or by increments of 100
		(above 100 KB).
		For more information, see page C-6.
PS MEMORY=	0K and up	This item appears only when RESOURCE SAVE=
400K	(This value	ON. Select the amount of memory used for
		saving PS resources. Printer default is the
	depends on the
		minimum amount of memory needed to
	amount of
		perform resource saving for PS. Press
	installed
		[-Value+]to change settings by increments of
	memory.)
		10 (up to 100 KB) or by increments of 100
		(above 100 KB).
		For more information, see page C-6.

EN

Control Panel Menus B-15