HP LaserJet 4050 Printing Transparencies, Figure 15 Printing Transparencies, Chapter 2: Printing Tasks, Load transparencies face up in Tray 1 with the top toward the printer

Printing Transparencies

Use only transparencies recommended for use in laser printers. For transparency specifications, see page A-10.

•

•

•

•

Load transparencies face up in Tray 1 with the top toward the printer.

A stack of 50 to 100 transparencies can be printed from other trays. Because transparencies are heavier than paper, do not load the other trays to capacity. For orientation in other trays, see Figure 12 on page 46.

To prevent transparencies from becoming too hot or sticking together, use the top output bin. Before using the top output bin, be sure the rear output bin is closed (page 32). Remove each transparency from the output bin before printing another.

Place transparencies on a flat surface to cool after removing them from the printer.

Figure 15 Printing Transparencies

EN

Chapter 2: Printing Tasks 55