HP 4050 Tray 3 TYPE=, Tray 4 TYPE=, Manual FEED=OFF, Duplex=Off, BINDING= Long Edge, Override

Paper Handling Menu (Continued)

Item	Values	Explanation
TRAY 3 TYPE=	For supported	Set the value to correspond with the paper type
PLAIN	paper types, see	currently loaded in Tray 3.
	page 66.	.
TRAY 4 TYPE=	For supported	This item appears only when a fourth paper tray
PLAIN	paper types, see	is installed (available only on the HP LaserJet
	page 66.	4050 T/4050 TN printers). Set the value to
		correspond with the paper type currently
		loaded in Tray 4.
MANUAL FEED=OFF	OFF	Feed the paper manually from Tray 1, rather
	ON	than automatically from a tray. When
		MANUAL FEED=ON and Tray 1 is empty, the
		printer goes offline when it receives a print job
		and displays MANUALLY FEED [PAPER SIZE].
		For more information, see page 64.
DUPLEX=OFF	OFF	This item appears only when an optional
	ON	duplexer is installed. Set the value to ON to print
		on both sides (duplex) or OFF to print on one
		side (simplex) of a sheet of paper.
		For more information, see page 41.
BINDING=	LONG EDGE	This item appears only when an optional
LONG EDGE	SHORT EDGE	duplexer is installed and the duplex option is
		on. Choose the binding edge when duplexing
		(printing on both sides of paper).
		For more information, see page 41.
OVERRIDE	NO	Choose YES to print on letter size paper when
A4/LETTER=NO	YES	an A4 job is sent, but no A4 size paper is loaded
		in the printer (or to print on A4 size paper when
		a letter job is sent, but no letter paper is loaded
		in the printer).

CONFIGURE FUSER	NO
MODE MENU=NO	YES

Configure the fuser mode associated with each paper type. (This is only necessary if you are experiencing problems printing on certain paper types.)

NO: The fuser mode menu items are not accessible.

YES: Additional items appear (see below).

Note

To see the default fuser mode for each paper type, select YES, scroll back to the Information Menu, and print a menu map (page B-4).

B-6 Control Panel Menus

EN