Loading the Optional 500-Sheet Tray

The optional 500-sheet tray is Tray 3 for the HP LaserJet 4050/4050 N printers, or Tray 4 for the HP LaserJet 4050 T/ 4050 TN printers. This tray is adjusted differently than Tray 2 (page 35). Tray 2 and the optional 500-sheet tray can be interchanged in the printer. For supported sizes of paper, see

page A-5.

Note

To avoid paper jams, do not load trays while the printer is printing.

1 Pull the tray completely out of the printer.

2 If the tray is not set to the desired paper size, squeeze the release on the left guide and adjust the left and right guides to match the width of the paper.

3 Squeeze the release on the back of the rear paper guide and slide it to the desired paper size.

4 Load paper into the tray.

Continued on the next page.

EN

Chapter 2: Printing Tasks 39

Page 61
Image 61
HP 4050 manual Loading the Optional 500-Sheet Tray