HP 4050 Input Device, Install Toner, Cartridge, Install Tray, Loading, Manually Feed, Memory Full

Printer Messages (Continued)

Message	Explanation or Recommended Action
INPUT DEVICE	An input paper handling device has a condition that needs attention
CONDITION xx.yy	before printing can resume.
	See the documentation that came with the paper handling device for
	assistance.
INSTALL TONER	The toner cartridge has been removed and must be replaced for
CARTRIDGE	printing to continue.
INSTALL TRAY X	The specified tray is not installed and must be inserted and closed
	for printing to continue.
LOADING	Programs and fonts can be stored on the printer’s file system. At
PROGRAM <number>	bootup time these entities are loaded into RAM. (These entities can
alternates with	take a long time to load into RAM depending on the size and number
	of entities being loaded.) The <number> specifies a sequence
DO NOT POWER OFF	number indicating the current program being loaded.
MANUALLY FEED	Load the requested paper into Tray 1.
[TYPE] [SIZE]	Press [Go] if the desired paper is already loaded in Tray 1.
MEMORY FULL	There is no available memory in the printer. The current job might not
STORED DATA LOST	print correctly and some resources (such as downloaded fonts or
	macros) might have been deleted.
	You might want to add more memory to the printer (page C-1).
MEMORY SETTINGS	The printer changed its memory settings because it did not have
CHANGED	enough memory to use the previous settings for I/O Buffering and
	Resource Saving. This usually occurs after removing memory from
	the printer, adding a duplexer, or adding a printer language.
	You might want to change memory settings for I/O Buffering and
	Resource Saving (although default settings are usually best) or add
	more memory to the printer (page C-1).
MEMORY SHORTAGE	The printer did not have enough free memory to print the entire job.
JOB CLEARED	The remainder of the job will not print and will be cleared from
	memory.
	Press [Go] to continue.
	Change the Resource Save setting from the printer’s control panel
	(page B-14) or add more memory to the printer (page C-1).
MEMORY SHORTAGE	The printer had to compress the job in order to fit it in available
PAGE SIMPLIFIED	memory. Some data loss might have occurred.
	Press [Go] to continue.
	The print quality of these pages may not be acceptable. Reduce the
	complexity of these pages and reprint them.
	You might want to add more memory to the printer (page C-1).
OFFLINE	Press [Go] to place the printer online.

106 Chapter 4: Problem Solving

EN