Printronix SL5000r MP manual RFID PGL Commands

Chapter 2 RFID PGL Commands

	LOCK<DFn>, where DFn is the dynamic
	field defined in EXECUTE mode.
	format is an optional parameter to specify
	the format for the passcode data. Enter B
	for binary, D for decimal, and H for
	hexadecimal. The default is decimal if
	format is not specified.
size	A decimal number specifying the overall
	bit length of the memory bank.
mem bank	Specifies which tag logical memory area
	that this command will be applied. If
	omitted, it defaults to the EPC memory
	area. Other areas include Identification,
	User Data, Access area and Kill area.
	Enter one of the following values:
	‘EPC’ – EPC 12 bytes data area (default)
	‘TID’ – Tag identification 8 bytes area
	(currently not applicable for RFWTAG)
	‘USR’ – User 32 bytes area
	‘ACS’ – 4 bytes access code area
	‘KIL’ – 4 bytes kill code area
Bit Field	A line description of a bit field and must
	have one of the following syntax formats:
	1. For non-incremental data (both static
	and dynamic)
	length;[DFn;]format;(D)datafield(D)
	2. For incremental fixed data
	length;I;format;STEP[idir]step;[RPTn;]
	[RSTn;](D)startdata(D)
	3. For dynamic incremental data
	length;IDFn;format;
length	A decimal number specifying the bit
	length of a field within a tag. The
	maximum length for each DFn field is 64
	bits for binary or decimal format. For
	hexadecimal format, the bit length can be
	up to the maximum bit length specified
	for the corresponding memory bank.

36