JVC LET0227-003A manual To bring up the DVD Player SET UP display later

Basic operations

2 Press 5/∞ to select the desired language.

You can select the on-screen language for the preference displays, etc. from among ENGLISH, FRENCH and GERMAN.

3 Press ENTER.

The second page is shown, in which the pull-down menu of the [MONITOR TYPE] is already open.

DVD PLAYER SET UP
MONITOR TYPE		4:3 L.B.
PICTURE SOURCE		16:9 NORMAL
		16:9AUTO AUTO
SCREEN SAVER		4:3 LB
		4:3 PS
MP3/JPEG
SELECT	USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER

MONITOR TYPE options

4 Press 5/∞ to select the desired monitor type.

For a normal (conventional) TV, select [4:3 LB] or [4:3 PS].

For a wide-screen TV, select [16:9 NORMAL] or [16:9 AUTO]. (See page 33)

5 Press ENTER.

The third page is shown, in which the pull-down menu of the [DIGITAL AUDIO OUTPUT] is already open.

DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT	DOLBY DIGITAL/PCM
ANALOG DOWN MIX	PCM ONLY
	DOLBY PROLOGIC
	DOLBY DIGITAL/PCM
D RANGE CONTROL	STREAM/PCM
OUTPUT LEVEL

To bring up the DVD PLAYER SET UP display later

Press CHOICE for a few seconds until the DVD PLAYER SET UP display appears.

To change the brightness of the display window

Press DIMMER on the remote control unit.

You can select the display window brightness from three levels and off.

Basic operations

SELECT	USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER

DIGITAL AUDIO OUTPUT options

6 Press 5/∞ to select a desired digital output signal type.

Set this item correctly when you connect the unit to an external surround decoder or D/A converter. (If you do not connect the unit to such a device, you do not have to set this item.)

•When connecting to a DTS, MPEG Multichannel, and DOLBY Digital decoder, select [STREAM/ PCM].

•When connecting to a Dolby Digital decoder, select [DOLBY DIGITAL/PCM].

•When connecting to other digital device, select [PCM ONLY].

7 Press ENTER.

The TV screen returns to the opening display.

11