| aPAUSE/SET |
TAPE | sSTOP/CLEAR |
|
POWER STANDBY/ | dPLAY/DIR/PRESET |
ON 6 | ( cPLAY/PRESET) |
REPEAT/ | r, t |
| |
MODE/SLEEP | wREC/REC MUTE |
CTAPE OPERATION
•Use Type I (normal) tapes only.
•
•
PLAYBACK
1 Press TAPE.
The power is turned on.
If the tape has been inserted, play begins.
2 Press PUSH EJECT to open the cassette holder and insert a tape with the side to be played facing up and the exposed side facing forward.
PUSH EJECT 
Press PUSH EJECT to close.
3 Press dPLAY/DIR/PRESET (cPLAY/
PRESET) to start playback.
Tape counter
To set the tape counter to “0000”
Press s in stop mode. The counter is also set to “0000” when opening the cassette holder.
sSTOP/CLEAR – Stops play.
aPAUSE/SET – Pauses play. To resume play, press again.
r/t – Rewinds/ fast forwards. To stop the winding, press s.
After listening, press POWER STANDBY/ON6 to turn the power off.
For CSD-FD92
To change the playback side, press d during play.
: Plays the side facing up (indicated for CSD- FD82 as well).
: Plays the opposite side.
To select a reverse mode, press * REPEAT/MODE/
SLEEP repeatedly.
: Plays one side only.
: Plays both sides once. Play stops at the end of the reverse side.
: Plays both sides repeatedly. * or MODE on the remote control
RECORDING
1 Insert a tape with the side to be recorded on facing up and the exposed side facing forward.
For
: Records on one side only.
or : Records on both sides. Check that 
is displayed, so as to start recording from the
side facing up.
2 Get ready to record from the source.
To record from a CD, press CD and load the disc. To record from a radio broadcast, press TUNER/ BAND and tune to a station.
3 Press w REC/REC MUTE to start recording.
“REC” flashes on the display.
When the selected function is CD, CD play and recording starts simultaneously.
To record only the selected tracks of a CD
1Follow steps 1 to 3 of PROGRAMMED PLAY on page 9 to program tracks.
2Press w.
