Aiwa CSD-TD20 manual General, Sound Adjustment, Setting The Sleep Timer, VOL volume, Modeequalizer

GENERAL

SOUND ADJUSTMENT

VOL (volume)

Press VOL ior k. The volume level is displayed as a number from 0 to MAX (25).

•The volume level is automatically set to 14 if the power is turned off when the volume level is set to 15 or more. (except when turning the power back on within 4 seconds)

To display the volume level when a function other than TAPE function is selected

Press VOL ior k. The volume level is displayed for 4 seconds.

3-MODE EQUALIZER

Press 3-MODE EQUALIZER until one of the indicators lights up.

The equalizer mode changes to ROCK, POP, JAZZ or no equalization, cyclically.

ROCK - Emphasizes the high and low range of music. POP - Emphasizes voice and midrange of music. JAZZ - Emphasizes the low range of music.

T-BASS system

The T-BASS system enhances the realism of low- frequency sound.

Press T-BASS and the T-BASS indicator lights up.

QSOUND system (CSD-TD21 only)

This system provides a rich, three dimensional sound area for stereo sources.

You can enjoy more enhanced sound.

Press QSOUND and the QSOUND indicator lights up.

•At higher volumes, turning QSOUND on may cause sound distortion. In this case, make the volume down.

SETTING THE SLEEP TIMER

The unit can be turned off automatically at a specified time.

1 Keep SLEEP pressed until “10” flashes in the display.

2 Within 4 seconds, press ror tto specify the time until the power is turned off.

Each time it is pressed, the time changes between 10 and 90 minutes in 10-minute steps.

Specified time	While the sleep timer works,
	the dot keeps flashing.

To check the time remaining until the power is turned off

Repeat step 1 shown above. The remaining time is displayed for 4 seconds.

To cancel the sleep timer

Display the remaining time and press ror t repeatedly until OFF is displayed.

NOTE

If the unit is turned off during tape playback, xon the deck will not be released. Press Zto release x.

ENGLISH 7