Aiwa CSD-TD20 manual Ctape Operation, Inserting A Tape, Playing A Tape, Recording, Sleep, r, t

C

POWER6STANDBY/ TAPE

VOL

PAUSE STOP/EJECT F FWD REWIND PLAY REC

	3-MODE EQ
SLEEP	T-BASS
r, t	QSOUND

(CSD-TD21 only)

CTAPE OPERATION

Use Type I (normal) tapes only.

INSERTING A TAPE

Press ZSTOP/EJECT to open the cassette holder and insert a tape with the exposed side up and the side to be played facing out.

Push the cassette holder to close.

PLAYING A TAPE

Press xPLAY while the power is off.

The power is turned on and play of the inserted tape begins.

The volume level is displayed during tape operation.

ZSTOP/EJECT – Stops play. The power will be automatically turned off.

aPAUSE – Pauses play. To resume play, press again. fF FWD/gREWIND – Fast forwards/rewinds. To

stop winding, press Z.

If an erroneous display or malfunction occurs Make sure that none of the deck operation buttons is pressed.

Press swhile pressing POWER 6STANDBY.

If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on.

6 ENGLISH

RECORDING

Note that recording is done on only one side of the tape.

1 Insert a tape with the side to be recorded facing out.

2 Get ready to record from the source.

To record from a CD, press CD and load the disc. To record from a radio broadcast, press RADIO/ BAND and tune to a station.

3 Press wREC to start recording.

xPLAY is pressed simultaneously.

When the selected function is CD, CD play and recording starts simultaneously.

To record only the selected tracks of a CD

1Follow steps 1 to 3 of PROGRAMMED PLAY on page 5 to program tracks.

2Press wREC.

To stop recording, press ZSTOP/EJECT.

When recording from a CD, play pauses. To stop CD play, press sSTOP/MEMORY.

To pause recording, press aPAUSE. To resume recording, press again.

To erase recording, press wREC while the power is off. After recording, press POWER 6STANDBY to turn the power off.

To prevent accidental erasure

Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording.

To record on the tape again

Cover the tab openings with adhesive tape, etc.

Side A

Tab for side A