Service menu
Use this menu to restore default settings, clean the product, and activate special modes that affect print output.
Menu item | Description |
|
|
Restore defaults | Sets all customized settings to the factory default values. |
|
|
PowerSave | Sets how long the product remains idle before it enters PowerSave mode. The |
| product automatically exits PowerSave mode when you send a print job or press a |
| |
| The default setting is 15 minutes. |
|
|
Cleaning mode | Use this option to clean the product if you see toner specks or other marks on the |
| printed output. The cleaning process removes dust and excess toner from the paper |
| path. |
| When you select this item, the product prompts you to load plain paper in tray 1 and |
| then press OK to start the cleaning process. Wait until the process is complete. |
| Discard the page that prints. |
|
|
USB speed | Sets the USB speed to High or Full. For the product to actually operate at high |
| speed, it must have high speed enabled and be connected to an EHCI host controller |
| that is also operating at high speed. This menu item also does not reflect the current |
| operating speed of the product. |
| The default setting is High. |
|
|
Less paper curl | If printed pages are consistently curled, use this option to set the product to a mode |
| that reduces curl. |
| The default setting is Off. |
|
|
Archive print | If you are printing pages that will be stored for a long time, use this option to set the |
| product to a mode that reduces toner smearing and dusting. |
| The default setting is Off. |
|
|
ENWW | Use the |