Network config. menu
Use this menu to establish network configuration settings.
Menu item | Description | |
|
|
|
TCP IP config | Automatic | Select Automatic to automatically configure all the |
| Manual | TCP/IP settings. |
| Select Manual to manually configure the IP address, | |
|
| |
|
| subnet mask, and default gateway. |
|
| The default setting is Automatic. |
|
|
|
Automatic crossover | On | This item is used when you are connecting the |
| Off | product directly to a personal computer using an |
| Ethernet cable (you might have to set this to On or | |
|
| Off depending on the computer being used). |
|
| The default setting is On. |
|
|
|
Network services | IPv4 | This item is used by the network administrator to limit |
| IPv6 | the network services available on this product. |
| On | |
|
| |
|
| Off |
|
| The default setting is On. |
|
|
|
Memory card | On | Use this option to enable or disable file sharing |
| Off | between an installed memory card and the product. |
| The default setting is Off. | |
|
| |
|
|
|
Show IP address on control | No | No: The product IP address will not appear on the |
panel | Yes | |
| Yes: The product IP address will appear on the | |
|
| |
|
| |
|
| The default setting is No. |
|
|
|
Restore defaults |
| Press OK to restore the network configuration |
|
| settings to the default values. |
|
|
|
48 Chapter 6 Control panel | ENWW |