Show or hide the IP address on the control panel
NOTE: When Show IP address is On, the IP address will alternately appear on the
1.On the
2.Use the Left arrow (
) or the Right arrow ( 
) button to select Network config., and then press OK.
3.Use the Left arrow (
) or the Right arrow ( 
) button to select Show IP address, and then press OK.
4.Use the Left arrow (
) or the Right arrow ( 
) button to select Yes or No, and then press OK.
Set memory card sharing
1.On the
2.Use the Left arrow (
) or the Right arrow ( 
) button to select Network config., and then press OK.
3.Use the Left arrow (
) or the Right arrow ( 
) button to select Memory card, and then press OK.
4.Use the Left arrow (
) or the Right arrow ( 
) button to select On or Off, and then press OK.
Set automatic crossover
1.On the
2.Use the Left arrow (
) or the Right arrow ( 
) button to select Network config., and then press OK.
3.Use the Left arrow (
) or the Right arrow ( 
) button to select Automatic crossover, and then press OK.
4.Use the Left arrow (
) or the Right arrow ( 
) button to select On or Off, and then press OK.
Set network services
1.On the
2.Use the Left arrow (
) or the Right arrow ( 
) button to select Network config., and then press OK.
3.Use the Left arrow (
) or the Right arrow ( 
) button to select Network services, and then press OK.
4.Use the Left arrow (
) or the Right arrow ( 
) button to select IPv4 or IPv6, and then press OK.
5.Use the Left arrow (
) or the Right arrow ( 
) button to select On or Off, and then press OK.
26 Chapter 4 I/O configuration | ENWW |
