HP CP1510 Misprint, Non HP supply installed, Order color cartridge, Order supplies, Print failure

Control-panel message	Status alert	Description	Recommended action
Misprint		Print media has been delayed as	Press OK to clear the message.
Press [OK]		it moves through the product.
Non HP supply installed		A non-HP supply is installed.	If you believe you purchased an
			HP supply, go to www.hp.com/
			go/anticounterfeit.
			Service or repairs that are
			required as a result of using non-
			HP supplies are not covered
			under HP warranty.
Order <color> cartridge		The identified print cartridge is	Order the identified print
		nearing the end of its useful life.	cartridge. Printing will continue
			until Replace <color> cartridge
			appears.
			See Supplies and accessories
			on page 123 for more
			information.
Order supplies		More than one supply item is low.	Check the supply-level gauges
			on the control panel, or print a
			Supplies status page to
			determine which cartridges are
			low. See Print information pages
			on page 68.
			Order the identified print
			cartridges. Printing will continue
			until Replace <color> cartridge
			appears.
			See Supplies and accessories
			on page 123 for more
			information.
Print failure		The product cannot process the	Press OK to continue printing the
Press [OK] If error repeats turn		page.	job, but output might be affected.
off then on			If the error persists, turn the
			power off and then on. Resend
			the print job.
Rear Door open		The product rear door is open.	Close the door.
Remove shipping locks from		A print cartridge shipping lock is	Be sure that the print cartridge
<color> cartridge		installed.	shipping lock has been removed.
Remove shipping locks from		A print cartridge shipping lock is	Be sure that each print cartridge
all cartridges		installed on one or more print	shipping lock has been removed.
		cartridges.
Replace <color> cartridge		The print cartridge is empty.	Replace the cartridge. See
			Replace print cartridges
			on page 85.

Replace supply

Override in use

The Print quality menu item Replace supplies is set to Override out.

You can continue printing until you notice a decrease in print quality.

See System setup menu on page 46.

ENWW Control-panel and status-alert messages 99