HP CP1510 manual Extended Print Modes, Print mode Setting

Extended Print Modes

CAUTION: These advanced settings should only be used to improve print quality. Changing these settings can have a significant impact on print quality and product operation.

Use these options to configure the Fusing, Transfer, Duplex Transfer, and Toner print modes that correspond to the various media types found in the printer driver. You can also change product Optimize settings, such as drum and transfer belt cleaning.

To reset all modes to factory default settings, select Restore modes.

NOTE: You must click Apply before your changes take effect.

Print mode	Setting
Fusing	●	Paper curl. Decreases the fuser temperature to prevent or reduce page curl. Page curl can be a
This print mode		problem for light-weight media that is used in a high-humidity environment.
		Heavy coverage. Increases the fuser temperature so that the toner properly adheres to the page when
controls the fuser	●
temperature.		a high percentage of toner is needed.
	●	Flap sealing. Decreases the fuser temperature to make sure that envelope flaps do not seal during
		printing.
	●	Less/More fusing. Provides two levels of decreased fuser temperatures and two levels of increased
		fuser temperatures. The user selects the best fuser temperature for the current print job.
Transfer	●	Dry paper. Increases the transfer bias voltage to prevent print-quality transfer problems in low-
This print mode		humidity (dry) environments.
controls the	●	Humid paper. Decreases the transfer bias voltage to prevent print-quality transfer problems in high-
transfer bias		humidity (wet) environments.
voltage.	●	Rough paper. Increases the transfer bias voltage to prevent print-quality transfer problems when using
		rough papers (for example, cotton bond papers).
	●	Less/More transfer. Provides two levels of decreased transfer bias voltage and two levels of increased
		transfer bias voltage. The user selects the best transfer bias voltage for the current print job.
Duplex Transfer	This mode has the same options as the Transfer mode, but is applied when the product is printing the
This print mode	duplex side of a two-sided print job.
controls the
transfer bias

voltage for duplex print jobs.

Toner

This print mode controls the amount of toner applied to a page.

Less toner

Decreases the amount of toner for each color that is applied to the page to prevent print-quality problems like toner scatter in high humidity (wet) environments. The options are 100% (No adjustment), 95% (-1), 90% (-2), and 85% (-3).

76 Chapter 9 Manage and maintain ENWW