HP CP1510 manual System setup menu, Menu item Sub-menu item Description Language, Reports

System setup menu

Use this menu to establish basic product settings. The System setup menu has several sub-menus. Each is described in the following table.

Menu item	Sub-menu item	Sub-menu item	Description
Language			Select the language for the control-panel
			display messages and the product
			reports.

Paper setup	Def. paper size	Letter
		A4
		Legal

Select the size for printing internal reports or any print job that does not specify a size.

	Def. paper type	A list of available media	Select the media type for printing internal
		types appears.	reports or any print job that does not
			specify a type.
	tray 2	Paper size	Select the default size and type for tray 2
		Paper type	from the list of available sizes and types.
	Paper out action	Wait forever	Select how the product should react
		Override	when a print job requires a size or type
			that is not available or when a specified
		Cancel	tray is empty.
			Select Wait forever to make the product
			wait until you load the correct media and
			press OK. This is the default setting.
			Select Override to print on a different
			size or type after a specified delay.
			Select Cancel to automatically cancel
			the print job after a specified delay.
			If you select either Override or Cancel,
			the control panel prompts you to specify
			the number of seconds to delay. Press
			the Right arrow ( ) button to increase
			the time, up to 3600 seconds. Press the
			Left arrow ( ) button to decrease the
			time.
Print quality	Calibrate color	After power on	After power on: Select how soon the
		Calibrate now	product should calibrate after you turn it
			on. The default setting is 15 minutes.
		Calibration mode	Calibrate now: Makes the product
			perform a calibration immediately. If a job
			is processing, the product calibrates after
			the job is complete. If an error message
			is displayed, you must clear the error
			first.

46 Chapter 6 Control panel ENWW