Aiwa NSX-A303, NSX-A304, CX-NA303 VIDEO/AUX Jacks, CD Digital OUT Optical Jack, Press VIDEO/AUX

CD DIGITAL OUT (OPTICAL)

1

vIDEO/AUX

SURROUND

SPEAKERS

Refer to the operating instructions of the connected equipment

for details.

●The connecting cords are not supplied. Obtain the necessary connecting cords.

●Consult your local Aiwa dealer for optional equipment.

?$,:--.:,’! ,=2. .s-...., . . . .=. ..,. ------., .,.,- .-:*N :=: : -m-7.%..-,:;:$.-’- .:-.,: -.. . . -.:’..2.:.=$ ‘~’.-:=~fl= .J”=*- .’”’

VIDEO/AUX JACKS

This unit can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio equipment (turntables, LD players, MD players, VCRs, TV, etc.).

Connect the red plug to the VIDEO/AUX R jack, and the white plug to the VIDEO/AUX L jack.

When connecting a turntable

Use an Aiwa turntable equipped with a built-in equalizer amplifier.

.T”zis:.u *X:.- “ ‘,.; S.? .*.:*,%4 .-.- ..-:- : .,_.L-., . y,yJ- & :;!

CD DIGITAL OUT (OPTICAL) JACK

This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment (DAT deck, MD recorder, etc.).

Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL) jack. Then, connect an optical cable plug to the CD DIGITAL OUT (OPTICAL) jack.

When the CD DIGITAL OUT (OPTICAL) jack is not being

used

Attach the SUppllMt O’USt cap.

POWER

To play equipment connected to the VIDEO/AUX jacks proceed as follows.

1 Press VIDEO/AUX.

“VIDEO” or “AUX appears on the display.

2Play the connected equipment.

To change a source name in the display

When VIDEO/AUX is pressed, “VIDEO or “AUX is displayed initially. It can be changed to “VIDEO, “AUX or “TV.

With the power on, press POWER while pressing VIDEO/AUX. Repeat the procedure to select one of the names.

17 ENGLISH