Aiwa NSX-A303 manual Press Tape and press a Eject to open the cassette holder, Press to start play

4., =..,.,,! .

PRESET”’N’UM’BE’RTUNiNG” “

Use the remote control to select the preset number directly.

1 Press BAND while pressing SHIFT to select a band.

2 Press numbered buttons O-9 and +1 O to select a preset number.

Example:

To select preset number 20, press +10, +10 and O. To select preset number 15, press +10 and 5.

Selecting a preset number on the main unit

Press TUNEFUBAND to select a band. Then, press > PRESET repeatedly or turn MULTI JOG.

Each time ➤ PRESET is pressed, the next ascending number is selected.

To clear a preset station

Select the preset number of the station to be cleared. Then, press

■CLEAR, and press 11 SET within 4 seconds.

The preset numbers of all other stations in the band with higher numbers are also decreased by one.

2

1	DOWN,
	UP

N

=EJECT

Deck 1

:

Use Type I (normal) tapes only.

1 Press TAPE and press A EJECT to open the cassette holder.

Insert a tape with the exposed side down. Push the cassette holder to close.

2Press > to start play.

Only the side facing out from the unit can be played back.

The selected deck number

Tape counter

To select a playing deck

When tapes are loaded in both decks, press TAPE first to selecl a deck.

The selected deck number is displayed.

To stop play, press ■ .

To pause play (deck 2 only), press 1I. To resume play, press again.

To fast forward or rewind, press 44 or>.	Then press ■ tc)
stop the tape.

To start play when the power is off (Direct Play Function) Press TAPE. The power is turned on and play of the inserteci

tape begins.

To set the tape counter to 0000

Press 9 CLEAR in stop mode.

The counter is also set to 0000 when the cassette holder is opened.

When tapes are loaded in both decks

After playback on deck 1 finishes, the tape in the deck 2 will start to play without interruption and will stop at the end of the tape. (Continuous play)

ENGLISH 8