Aiwa NSX-R71 manual Programmed playback, To check the program, To clear the program

Programmed playback

Plays back up to 30 selected tracks in programmed order.

1Press SHIFT+PROGRAM on the remote control during stop.

"PRGM " flashes on the display.

2Press CD DIRECT on the remote control and then press the numbered button (1-3) within 3 seconds to select a disc.

Go to the next step when the tray stops rotating.

3Press the numbered buttons on the remote control to program a track.

The selected track number lights up on the display. -To select the 25th track, press +10, +10 and 5. -To select the 10th track, press +10 and 0.

4Repeat step 2 and 3 to program other tracks.

5Press d.

•During programmed playback, you cannot select a disc or a track with the numbered buttons. "CAN'T USE " is displayed when you try to select a track .

•If the total playback time of the program exceeds 99:59 minutes, or if a track with a track number exceeding 30 is programmed, the playing time is displayed as "- -:- - ".

•You cannot program more than 30 tracks. "FULL " is displayed.

To check the program

Press for grepeatedly during stop. The track number and program number are displayed in succession.

To clear the program

Press sduring stop. "PRGM " disappears on the display.

To add tracks to the program

Repeat step 2 and 3 before starting playback. The tracks are added to the end of the program.

To change the programmed tracks

Clear the program and reselect the tracks in your desired order.

Notes on CDs

•Do not place more than one disc on one tray. •Do not tilt the unit with discs loaded.

•The unit may not play a CD-R/RW disc recorded on personal En computers or certain kinds of CD-R/RW recorders.

•Do not attach adhesive label, etc. to either side of a CD-R/ RW disc, as doing so may cause malfunction.

•Do not load an unrecorded CD-R/RW disc. The disc may be damaged.

•Do not use irregular-shaped CDs.

11