Aiwa NSX-R71 manual Adjustments Before Operations, Power, Volume, Demo, Spectrum analyzer display

ADJUSTMENTS BEFORE OPERATIONS

En

Power

Turning the unit on

Press POWER 6STANDBY/ON (POWER on the remote control).

Turning the unit off

Press POWER 6STANDBY/ON again.

The unit goes into standby.

Volume

Turn VOLUME (Press VOLUME +, - on the remote control).

Adjust from 0 (minimum) to 40 and MAX (maximum).

Tip:

Volume level setting is retained during power-off standby. If the unit is turned off with the volume set to 27 or more, it is automatically turned down to 26 the next time the unit is turned on.

DEMO

If the clock has not been set, a DEMO appears on the display when the unit is turned off.

To deactivate and activate the DEMO

Press DEMO/ECO when the unit is turned off.

Spectrum analyzer display

You can change the spectrum analyzer display.

Press MODE twice and then within 4 seconds turn MULTI JOG to select one of the three spectrum analyzer displays.

On the remote control, press SHIFT+DISPLAY repeatedly.

-NORMAL: Displays the fluctuation from low frequencies to high ones

-BASS: Displays the fluctuation of low frequencies only

-LEVEL: Displays the fluctuation of the average of all the frequencies.

Dial Function

Turn the Dial Function to select a function (TAPE, TUNER, VIDEO/AUX or CD).

The red light beside the selected function turns on.

8