Aiwa NSX-R71 manual Parts And Controls, Main unit rear, Dynamic Integrated New Amplifier

PARTS AND CONTROLS

Main unit: rear

1 CD DIGITAL OUT (OPTICAL) jack

Outputs CD digital sound signals to digital audio equipment. Remove the dust cap and connect using an optional optical cable plug. When this jack is not being used, attach the supplied dust cap.

2 MW/LW LOOP, FM 75 Ω terminals

Plug in the supplied MW/LW and FM antennas here.

3 VIDEO/AUX jacks

Accepts analog sound signals from external equipment. Connect using an optional connecting cable with RCA phono plugs (red plug to R jack, white plug to L jack). Refer also to the operating instructions of your equipment. To switch function to external input, turn the Dial Function (see "ADJUSTMENTS BEFORE OPERATIONS") to select the VIDEO/AUX function.

Tip:

To change the displayed name for this function, select the VIDEO/AUX function, then hold down ENTER and press POWER on the unit. Repeat the procedure to select "AUX ", "VIDEO " or "TV ".

4 SPEAKERS3terminals

Dynamic Integrated New Amplifier

is a brand-new amplifier system where clear mid-to-high range frequency sound, as well as rich low frequency sound, can be En reproduced and listeners can enjoy the close-to-original sound

with less distortion at either high or low volume levels.

Connect the speaker cord of the supplied front speakers here.

5AC power cord

5