| PTY Search |
| The unit can search for a station broadcasting your desired PTY |
En | easily. To do so, you need to preset every available station in |
advance since the unit searches only the preset stations. |
1Press PTY.
2Press for gto select a desired program type and then press PTY.
The search begins, stops when a suitable station is detected, and the unit tunes it in.
"NO DA TA" is displayed if a suitable station is not found, and the unit returns to the previous station.
If there is no button input for 4 seconds in step 2, the search is not activated.
•MULTI JOG is also available in place of for g.
Tip:
If TRAFFIC (PTY) is selected , the unit searches for a station which regularly broadcasts traffic announcements. Therefore, a detected station may not be currently broadcasting traffic announcements. You will, however, be able to hear the announcements in a while.
EON Search
The unit can leap to a station which has just started broadcasting your desired PTY.
In EON (Enhanced Other Networks information) Search, the unit is in standby mode until the desired PTY begins. As soon as it begins, the unit "leaps to" another station with the PTY and returns to the previously tuned station when it ends. EON Search makes the function above possible with the help of EON which gives the receivers a cross reference to other stations. You need to preset every available station in advance since the unit searches only the preset stations.
1Tune in an RDS station.
If "EON " lights up, proceed to the next step.
If not, try to tune in another RDS station until it does.
2Press PTY to display the program type.
3Press for gto select a desired program type and then press a.
"EON ON " is displayed for 3 seconds and then the unit enters the standby mode while "EON " flashes. When the unit leaps to another station, "EON " flashes rapidly.
If there is no button input for 4 seconds in step 3, the search is not activated.
•MULTI JOG is also available in place of for g.
To return to the previously tuned station from the "leaped to" station
Press d. The standby mode for EON Search is also cancelled.
To cancel the standby mode for EON Search
Hold down PTY for a while so that "EON PTY " and the selected PTY are displayed alternately, and then with PTY held down, press a. "EON OFF " is displayed.
•The standby mode for EON Search will not be cancelled even if the unit is turned off.
Note on PTY & EON Search
PTY & EON Search do not function under the following conditions:
-FM stations are not preset.
-The signals of the station broadcasting the desired PTY are weak.
-FM RDS stations cannot be received.
14
