AI EDIT RECORDING
s
5 | 4 |
| |
| 3 |
1 | 2 |
| |
| f,g |
The AI edit recording function enables CD recording without worrying about tape length and track length. When a CD is inserted, the unit automatically calculates the total track length. If necessary, the order of tracks is rearranged so that no track is cut short.
(AI: Artificial Intelligence)
AI edit recording will not start from a point halfway into the tape. The tape must be recorded from the beginning of either side.
Use the remote control from steps 2 to 4.
1Insert the tape into deck.
Insert the tape with the side to be recorded on first facing out from the unit.
2 Press FUNCTION repeatedly until “CD” is displayed and load the disc.
3Press MODE repeatedly until “AI EDIT” appears
on the display.
“EDIT” lights up and “AI” flashes on the display.
AI EDIT
Each time it is pressed, the display changes as follows.
RANDOM 
PRGM 
AI EDIT 
PRGM EDIT
4Press numbered buttons 0-9 to designate the tape
length.
10 to 99 minutes can be specified.
Example: When using a
In a few seconds, the tracks to be recorded on each side of the tape are determined.
• fand gare also available to designate the tape length.
| Number of | Selected | RECORDING |
| programmed | tracks | |
|
| ||
Tape length | tracks | for side A |
|
| Tape side | Remaining |
|
| A: First recording side | time of |
|
| B: Second recording side | side A |
|
5Press wREC/REC MUTE to start recording.
The tape is rewound to the beginning of the front side, the lead segment is played through for 10 seconds, and recording starts. When recording on the front (side A) ends, recording on the back (side B) starts.
To stop recording
Press s. Recording and CD play stop simultaneously.
To clear the edit program
Press stwice so that “EDIT” disappears on the display.
To check the order of the programmed track numbers
Before recording, press MODE on the remote control to select side A or B, and press f or g repeatedly.
|
|
|
|
| Programmed | ||||
Tape side | Program number track numbers | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Track number | En |
Time on cassette tapes and editing time
The actual cassette recording time is usually a little longer than the specified recording time printed on the label. This unit can program tracks to use the extra time. When the total recording time is a little longer than the tape’s specified recording time after editing, the display shows the extra time (without a minus mark), instead of the time remaining on the tape (with the minus mark).
•Recording is inhibited if the erasure prevention tab on either side of the tape is broken off.
•The AI edit function cannot be used with discs containing 31 tracks or more.
ENGLISH 12
12 | 10/4/2000, 5:09 PM |
