Care and Maintenance
Cleaning
To clean normal dust, wipe your RR 2150 with a clean, soft, dry cloth.
If the dirt has really accumulated (Outlaws aren’t always the most meticulous people, are they?), first wipe the surface with a soft cloth that’s slightly damp- ened with mild soapy water. Follow that with a fresh cloth dampened with clean water. Wipe dry immediately!
NEVER use benzene, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of the metal parts.
Avoid spraying insecticide, waxes, polishing agents, or any aerosol product near the unit.
When You’re Away
If you will not be using your home theater system for an extended period of time, it’s always a good idea to turn everything off.
For the RR 2150, this means unlatching the rear panel’s Master Power switch (RP8). This will prevent the automatic turn on circuits from accidentally turning the system on during your absence.
You may want to unplug all your other components, too.
If you think there’s a possibility of electrical storms during your absence, it’s also a very good idea to disconnect all “downleads” (cable and satellite antenna connections, etc.) to prevent high voltage spikes that may damage your components.
Owner’s Manual
Troubleshooting
Troubleshooting
Your new RR 2150 is designed to provide years of
You can also look at the RR 2150 section of our website (www.outlawaudio.com), or enter the RR 2150 Section of our Outlaw Saloon. If your problem persists, please call us at
Symptom | Possible Cause | Solution Options |
|
|
|
Unit does not turn on when remote or | No AC Power |
front panel buttons are pressed |
|
Make certain AC power cord is plugged into a live outlet Make certain rear panel MAIN POWER switch is ON
Intermittent buzzing in tuner | Interference from local sources | Move or relocate the antenna |
|
| Move the antenna or unit away from computers, fluorescent or neon lights, or appliances |
|
| with motors |
Unit does not respond to remote commands
Low remote battery power | Change the batteries |
Remote set to different device | Press the RR button to make sure the remote is outputting RR 2150 codes |
Remote sensor is obscured | Make certain the |
| sensor |
No sound from one or both channels | Poor connections | Check interconnects to the amplifier and speakers |
| Incorrect speaker mode | Check speaker selector to make sure connected speakers are turned on. |
|
|
|
RR 2150 Stereo RetroReceiver
23
