EDITING THE ARPEGGIATOR
The
The following arpeggio settings may be edited:
ARP TYPE – This is the arpeggio type, which describes how the notes held will be arpeggiated. RANGE – This setting describes the range, in octaves, that the arpeggio will span.
BUTTON MODE – This describes whether the [ARP ON/OFF] button functions in a momentary or toggle fashion.
GATE – The gate parameter describes the duration of the arpeggiated notes.
SWING – The swing parameter describes the swing offset for the even notes in the arpeggiated sequence.
SELECT PROPERTY
1.To edit the Arpeggiator, press the [EDIT] button to enter Edit Mode.
2.Now select the Arpeggiator for editing by pressing [ARP ON/OFF].
3.You will see Page 1 displayed on the screen (shown on the left).
4.Turn the [VALUE] dial to select the property cluster you wish to edit - (Type, Range, Button Mode) or (Gate, Swing).
5.Press [ENTER] to edit the selected property cluster.
PRESS ENTER TO EDIT
While editing the Arpeggiator, please also refer to the following examples to better understand how the parameters function:
Let’s take the arpeggiated sequence on the left as an example.
With a long gate time (100), the duration of the notes in the sequence will be longer.
With a short gate time (25), the duration of the notes in the sequence will be shorter.
Now, if we add some swing to our original sequence, you will see that the even notes will become shifted in time. The larger the selected swing, the larger this shift will be.
Now if we were to extend the range of our original sequence to +1 scale, the ascending notes will be duplicated 1 octave up before beginning to descent.
21
