Akai MPK61, MPK88 EDIT MODE

9

NAVIGATING EDIT MODE

1. Press the [EDIT] button.

2. To select the controller you wish to edit, simply engage it – this will

prompt the screen to display the properties of the particular controller

(Page 1).

3. If there are multiple properties for the selected controller, turn the

[VALUE] dial to select the property you wish to edit. Press [ENTER] to

view the parameters of the selected property, if available (Page 2).

4. To move between the parameter fields on Page 2, use the [<] and [>]

buttons. To change the values of the fields, turn the [VALUE] dial.

5. When finished editing the controller, press [ENTER] to accept the change

or press [<] to cancel.

FIELD 1

FIELD 2

FIELD 3

FIELD 4

EDIT MODE

Pressing the [EDIT] button calls up

Edit Mode. In this mode, you can

edit the settings of the currently

selected Preset. The settings vary

depending on the controller you are

editing and are described below.

Please note that the changes you

make will only apply to the currently

selected Preset.

You can use the example screenshot on the right to

help you determine where the Page 2 parameters

described on the following page will appear on the

screen.

Contents

Main Page TABLE OF CONTENTS FRONT PANEL OVERVIEW Page REAR PANEL OVERVIEW 8 123 667 54 HOOKUP DIAGRAM A NOTE ABOUT USING THE MPK61/MPK88 WITH SOFTWARE IMPORTANT DISPLAYING INFORMATION OCTAVE AND TRANSPOSITION NOTE NOTE AFTERTOUCH (Channel Pressure) CONTROL CHANGE CONTROL AFTERTOUCH MIDI MACHINE CONTROL COMMAND (MMC) PREVIEWING ABOUT MODES PRESET MODE PAGE 1 LOAD PRESET PAGE 2 SAVE/COPY PRESET PAGE 3 NAME PRESET EDIT MODE EDIT MODE PARAMETERS EDITING THE KEYBOARD KEYBOARD OCTAVE KEYBOARD AFTERTOUCH KEYBOARD VELOCITY EDITING THE PADS NOTE PARAMETERS The following list of parameters can be accessed if the pad event type is set to Note. MIDI CHANNEL FIELD PROGRAM CHANGE PARAMETERS The following list of parameters can be accessed if the pad event type is set to Program Change. MIDI CHANNEL FIELD PROGRAM CHANGE FIELD EDITING KNOBS AND FADERS The following list of parameters can be accessed if the pad event type is set to Note. MIDI CHANNEL FIELD CONTROL CHANGE FIELD MINIMUM RANGE FIELD MAXIMUM RANGE FIELD AFTERTOUCH PARAMETERS MIDI CHANNEL FIELD MINIMUM RANGE FIELD MAXIMUM RANGE FIELD INCREMENT/DECREMENT PARAMETERS (knobs only) EDITING BUTTONS MIDI CHANNEL FIELD CONTROL CHANGE FIELD PLAY MODE PROGRAM CHANGE PARAMETERS MIDI CHANNEL FIELD PROGRAM CHANGE FIELD EDITING THE ARPEGGIATOR ARPEGGIO PARAMETERS TYPE, RANGE, BUTTON MODE ARP TYPE RANGE BUTTON MODE ARPEGGIO PARAMETERS GATE, SWING GATE SWING EDITING NOTE REPEAT NOTE REPEAT BUTTON MODE NOTE REPEAT PARAMETERS GATE, SWING GATE SWING EDITING TIME DIVISION DEFAULT TIME DIVISION BUTTON MODE EDITING THE PITCH BEND WHEEL EDITING THE MODULATION WHEEL MIDI CHANNEL MIDI CC MINIMUM VALUE MAXIMUM VALUE EDITING TRANSPORT CONTROL EDITING TAP TEMPO EDITING FOOTSWITCH PEDAL INPUTS MIDI CHANNEL FIELD CONTROL CHANGE FIELD PLAY MODE When finished editing, press [ENTER] to save or [<] to cancel the changes. EDITING EXPRESSION PEDAL INPUT EDITING SPLIT SPLIT POINT SPLIT PARAMETERS GLOBAL MODE KILL MIDI Page1 MIDI COMMON CHANNEL Page 2 LCD CONTRAST Page 3 KEYBOARD VELOCITY CURVE Page 4 PAD SENSITIVITY Page 5 PAD VELOCITY CURVE Page 6 PAD THRESHOLD Page 7 KEYBOARD TRANSPOSITION Page 8 MIDI CLOCK Page 9 TAP TEMPO AVERAGE Page 10 SAVE GLOBAL Page 11 SYSEX TX Page 12 VERSION Page 13 PROGRAM CHANGE MODE PROG CHANGE (Program Change) PROG+BANK (Program Change with Bank Change) FREQUENTLY ASKED QUESTIONS TROUBLESHOOTING PROBLEM CAUSE SOLUTION TECHNICAL SPECIFICATIONS CONTACT INFORMATION