DSP operations

English

Owner’s manual

Woofer out adjustment

Select woofer output out of “STEREO”, “MONO”, or “OFF”.

Touch the select a desire item key to set it.

Woofer LPF adjustment

Select woofer LPF slope out of “50Hz”, “80Hz”, “120Hz”.

Touch the select a desire item key to set it.

HPF adjustment

Select HPF slope out of “50Hz”, “80Hz”, “120Hz”, or “OFF”.

Touch the select a desire item key to set it.

Test Tone Output

Select Test Tone Output

Touch the select a desire item key to produce a test tone.

4.After adjustment (setting), touch the [RTN] key to return to the adjustment selection dis- play.

5.Press the [ADJ] button again or touch the

[RTN] key to return to the STANDARD display.

Selecting the Standard mode or the professional mode

The factory default setting is “STANDARD”.

1.Press the [ADJ] button to switch to the ad- justment selection display.

2.Touch the [z] key two times to select “AC PROCESSOR”.

Entering titles

You can give a title to the user memory of the G.EQ, DSF, VSE and P.EQ that you have ad- justed yourself.

1.Press the [A-M] button to select the adjust- ment mode in which you want to give a title.

2.Touch the [USER] key to select the “USER”.

3.Touch the [USER TITLE] key to select the user memory to which you want to give a title.

4.Touch the [TITLE] key in the USER TITLE display, the display switches to the title input mode display.

5.Touch the characters, symbols, etc. shown in the display to enter titles.

, ” : Centering

BS” : Backspace

” : Space

MEMO” : Memory

z(w)” : Scroll

Note:

Up to 8 characters can be input.

To switch the character types, touch the scroll key (w) at the lower left of the display.

6.Repeat the step 5 to input the title.

7.Touch the [MEMO] key for 2 seconds or longer to store the title into memory.

8.Press the [A-M] button again. The unit re- turns to the previous mode.

Touch the [AC PROCESSOR] key to select “PRO” and “STANDARD”.

3.Touch the [PRO] or [STANDARD] to select a desired mode and to set the mode thus se- lected.

4.After setting, press the [ADJ] button again to return to the STANDARD display.

Standard mode/Setting the listening position

Selection of listening position

1.Press the [A-M] button to show the AUDIO- MODE display.

2.Touch the [z] key to select “POSI. SELECT”.

Woofer level adjustment

You can adjust an output sound level of subwoofer.

1.Press the [A-M] button to show the AUDIO- MODE display.

2.Touch the [WOOFER VOL] key to show the woofer level adjusting display.

3.Touch the [w] or [z] key to adjust the level (0 to 14)

4.After adjustment, touch the [RTN] key to re- turn to the STANDARD display.

Touch the [POSI. SELECT] key to set the lis- tening position type.

There are FULL SEAT, FRONT R (only right seat), FRONT L (only left seat), FRONT (only front seats), REAR (only rear seats) and PASS available for the listening position types.

The factory default setting is “FULL SEAT”.

Detail adjustment of listening position

1.Press the [A-M] button to show the AUDIO- MODE display.

36 VRX835

Page 32
Image 32
Clarion VRX835 DSP operations, Selecting the Standard mode or the professional mode, Selection of listening position