Basic Operations
Showing a mode display
When the panel is open:
Touch the menu screen switching touchkey when the main screen is being displayed to show the menu screen.
Touch the Title List Select key
In the Title List display, the titles of items stored in the [DIRECT] buttons 1 to 6 are listed.
Opening and turning the display
WARNING
•To prevent the battery from going dead, operate this unit with the engine run- ning, if possible.
•When the liquid crystal panel is operating, be careful not to get your hand or finger caught between the panel and main unit or the instrument panel of the car.
Standing up the liquid crystal panel
Press the [OPEN] button and the liquid crystal panel comes out and stand up automatically.
∗While the liquid crystal panel is opening or closing, the LED blinks.
Note:
•If the liquid crystal panel stops in the middle of its operation, press the [OPEN] button to house the panel and press the button again to stand it up.
The unit enters the same display mode as the dis- play was turned off the last time.
liquid crystal panel | English | |||||
Adjusting the angel, etc. of the |
| |||||
The angle of the liquid crystal panel or protrud- |
| |||||
ing angle of the unit or light coming into the car. | Owner’s | |||||
ing amount of the panel from the mounting sur- |
| |||||
face can be adjusted depending on the mount- | manual | |||||
To adjust the angle |
|
|
|
| ||
|
|
|
|
| ||
Every time the [TILT] button is pressed, the liq- |
| |||||
uid crystal panel tilts forward or backward at up |
| |||||
| ||||||
to about 20 degrees. The adjusted angel is |
| |||||
stored in memory. |
|
|
|
|
| |
˚ | 20 | ˚ |
| |||
20 |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note:
•Do not move the liquid crystal panel by hand.
To adjust the slide position
Press and hold the [TILT] button and release when a beep is heard.
The liquid crystal panel slides forward or back- ward. The adjusted slide position is stored in memory.
Housing the liquid crystal panel
Press the [OPEN] button and the liquid crystal panel is housed automatically.
Note:
•When leaving this unit unused for a long period of time or leaving your car, be sure to house the liq-
uid crystal panel into the main unit.
VRX835 17
