Basic Operations

English

Owner’s manual

Turning the liquid crystal panel horizontal (Air conditioner operation mode)

When the way the liquid crystal panel is mounted hinders the operation of the air condi- tioner, the position of the panel can be turned horizontal temporarily.

1.Press and hold the [OPEN] button when the liquid crystal panel is upright, and release the button when a beep is heard.

2.The liquid crystal panel turns horizontal.

When the panel is closed:

Each time you press the [Z-EHCR] button of the remote control unit, the tone effect changes in the following order:

“Z-EHCR 1” “Z-EHCR 2” “Z-EHCR 3”

“Z-EHCR OFF” “Z-EHCR 1”...

Note:

When the panel is closed, operations can only be made through the remote control unit.

When the panel is open:

Press the [OPEN] button again when the liquid crystal panel is in the horizontal position, and the panel returns to the original position.

Even if the button is not operated for about 10 seconds, the panel returns to the original position with a warning sound.

Turning on and off the monitor

Pressing and holding the [DISP] button for 1 second or longer turns the monitor off. To return to the monitor on, press the [DISP] button once again.

When a button is pressed or during security moni- toring, the monitor-off mode is canceled.

1.Press the [A-M] button to change into the AUDIO-MODE display.

2.Touch the [Z-ENHANCER] key when the AU- DIO-MODE screen is being displayed to show the Z-ENHANCER type selection screen.

3.When the Z-ENHANCER type selection screen is displayed, touch the key for the de- sirable type to select it.

TYPE 1(Z-Enhancer 1)

TYPE 2(Z-Enhancer 2)

TYPE 3(Z-Enhancer 3)

OFF(Z-Enhancer off)

4.When the setting is finished, touch the [RTN] key to return to the AUDIO-MODE screen.

Mute

Touch the [RTN] key on the AUDIO-MODE

screen to return to the STANDARD display.

Each time you press the [s] button, mute is

To return from the Z-ENHANCER type

turned on and off.

selection display to the STANDARD display,

MUTE” appears when mute is turned on.

press the [A-M] button once again.

Setting the Z-enhancer

This unit comes with 3 types of sound tone effect stored in memory. Select the one you prefer.

The factory default setting is Z-EHCR OFF”.

When a Z-enhancer comes on (1-3), Z-EHCR appears in the display.

Z-EHCR 1(Z-Enhancer 1):

Setting emphasizing bass.

Z-EHCR 2(Z-Enhancer 2):

Setting emphasizing treble.

Z-EHCR 3(Z-Enhancer 3):

Setting emphasizing bass and treble.

Z-EHCR OFF(Z-Enhancer off):

Neither bass nor treble are em- phasized by the Z-enhancer.

Note:

Incapable of operation when connecting DSP (DPH910) and DVD player (DVS9755z).

Adjusting the Z-enhancer

Notes:

The Z-enhancer cannot be adjusted when it is turned off.

This function is enabled only when the panel is open. 1. Press the [A-M] button to change into the

AUDIO-MODE display.

2.Touch the [Z-EHCR LV] key when the AUDIO- MODE screen is being displayed to show the Z-ENHANCER level adjustment screen.

3.Touch the [w] or [z] key to adjust to the de- sirable level.

When type 1 is selected, you can adjust the bass in the range of ±2.

When type 2 is selected, you can adjust the treble in the range of ±2.

When type 3 is selected, you can adjust the bass and treble in the range of ±2.

4.When adjustment is finished, touch the [RTN] key on the Z-ENHANCER level adjustment

18 VRX835

Page 14
Image 14
Clarion VRX835 Basic Operations, Turning on and off the monitor, Mute, Setting the Z-enhancer, Adjusting the Z-enhancer