Other Functions
Setting the sprite pattern speed
∗The factory default setting is “MID” (mid).
1.When the panel is open, press the [ADJ] but- ton to select the adjustment mode.
2.Touch the [ANA SENS] key to select “HIGH” (high) or “MID” (mid) or “LOW” (low).
3.Touch the “HIGH” (high) or “MID” (mid) or “LOW” (low) key to select a desired mode and set it.
4.Press the [ADJ] button again or touch the [RTN] key. The unit returns to the previous mode.
Clock Adjustment
1.When the panel is open, press the [ADJ] but- ton to select the adjustment mode.
2.Touch the [z] key to select “CLOCK”. Touch the [CLOCK] key to adjust the time.
3.Touch the [w],[z],[a.m] or [p.m] key to ad- just the time.
∗ The time is displayed in
4.Press the [ADJ] button again or touch the
[RTN] key two times. The unit returns to the previous mode.
Triggered audio mute for cellular telepones
This unit requires special wiring to mute the au- dio signal automatically when a cellular tele- phone rings in the car.
∗This function is not compatible wiht all cellular telepones Contact your local authorized Clarion dealer for information on proper installation and compatibility.
DSP operations
DSP control function
If the DSP (DPH910), sold separately, is con- nected to this unit using the CeNET cable, all the functions of the DSP can be controlled.
∗DSP control can all be operated only when the panel is open.
DSP functions
There are 2 modes available in DPH910, stan- dard mode and professional mode. Choose one of them and adjust the sound field and the sound quality.
●Functions common to each mode:
Such as auto loudness, subwoofer etc.
●Standard mode:
Adjustment using the graphic equalizer function and the DSF (Digital Sound Field) function.
●Professional mode:
Adjustment using the VSE (Virtual Space En- hancer) function and the parametric equalizer function.
∗When the standard mode is selected, adjustment for the professional mode cannot be made. On the con- trary, when the professional mode is selected, ad- justment for the standard mode cannot be made.
∗For details on functions of each mode, refer to the owner’s manual supplied with the DPH910.
∗Hereafter the graphic equalizer is referred to as a G.EQ, referred to as VSE and the parametric equalizer referred to as P.EQ.
Operations common to each mode
Output adjustment of auto loudness, subwoofer and playback band
1.Press the [ADJ] button to switch to the ad- justment selection display.
2.Touch the [z] key two times to select “SOUND”.
Touch the [SOUND] key to change into the Sound adjustment display.
In the Sound adjustment display “AUTO LOUD”,
Touch the [LIST] key to select an item to be adjusted.
3.To make an adjustment on:
● Auto loudness adjustment
Touch the [w] or [z] key to adjust an auto loudness level (0 to 10).
English
Owner’s manual
VRX835 35
