DSP operations
2.Touch the [z] key to select “POSI. DETAIL”.
Touch the [POSI. DETAIL] key to show Posi- tion Detail adjusting display.
3.Touch the [w] or [z] key to adjust to a de- sired fader.
Adjusting range of the fader: front 9/rear 9
4.Touch the [Î] or [Å] key to adjust to a de- sired balance.
Adjusting range of the balance: left 9/right 9
5.When the adjustment is finished, press the [A- M] button again or touch the [RTN] key two times to return to the STANDARD display.
∗After selecting the G.EQ pattern, touch the [MEMO] key to copy the selected pattern to the USER pattern.
∗Touch the [EDIT] key to show G.EQ adjusting display, in which the properties of currently selected pattern can be adjusted.
∗By pressing the [BAND] button in BASIC pattern selecting display or USER pattern selection/memory display you can switch between the two patterns, BASIC and USER.
4.After the selecting, press the
English
Owner’s manual
Standard mode/G.EQ operations
Note:
•The adjustment made in standard mode is not re- flected in the adjustment in professional mode. Respectively, the adjustment made in profes- sional mode is not reflected in the adjustment in standard mode.
G.EQ effect ON/OFF
∗The factory default setting is “ON”.
1.Press the
2.Touch the [G.EQ ON/OFF] key to select “on” and “off”.
3.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.
4.After the setting, press the
Note:
•If the G.EQ effect is set to OFF, the adjustment made in “G.EQ operations” is not reflected in the music source.
Calling G.EQ BASIC Pattern/USER Pattern
1.Press the
2.Touch the [G.EQ BASIC] and [G.EQ USER] key to show BASIC pattern selecting display or USER pattern selection/memory display.
3.In the pattern selecting display, touch the one of pattern key and called the desired G.EQ pattern.
In this display, pressing the No. button in cor- respondence to the [DIRECT] key can also call the G.EQ pattern.
Setting and storing G.EQ Properties/ Memory into USER Pattern
1.Repeat the steps 1 and 2 of the previous proce- dure (Calling G.EQ BASIC pattern/USER pat- tern) to show BASIC pattern selecting display or USER pattern selection/memory display.
2.Touch the [EDIT] key to show the G.EQ ad- justing display.
3.When some frequency to be adjusted is se- lected by touching the [Î] key or [Å] key (or the frequency key) in the G.EQ adjusting dis- play, a gain setting value at the selected fre- quency is displayed.
There are “50Hz”, “100Hz”, “200Hz”,
“400Hz”, “1kHz”, “3kHz” and “12kHz” avail- able for the adjustment frequency.
4.Touch the [w] or [z] key to adjust the G.EQ GAIN. The adjustment range is from
5.After making adjustments to a desired pat- tern by repeating the operations of items 3 and 4, touch the [RTN] key to change over to the BASIC/USER pattern selection/memory display.
6.Press and hold one of [DIRECT] buttons for 2 seconds or longer to store the adjusted G.EQ pattern to be USER memory.
7.To set a title of the stored USER pattern, touch the [TITLE] key to change into the [TITLE INPUT] key.
∗For title inputting method, refer to the section “Entering titles”.
8.Press the [A-M] button to change into the STANDARD display.
VRX835 37
