DSP operations

4.After the setting, press the [A-M] button again or touch the [RTN] key to return to the STANDARD display.

Note:

If the VSE effect is set to OFF, the adjustment made in “VSE operations” is not reflected in the music source.

Calling VSE BASIC Pattern/USER Pattern

1.Press the [A-M] button to show the AUDIO- MODE display.

2.Touch the [VSE BASIC] and [VSE USER] key to show BASIC pattern selecting display or USER pattern selection/memory display.

3.In the pattern selecting display, touch the one of pattern key to call corresponding VSE pat- tern.

In this display, pressing the No. button in cor- responding to the [DIRECT] key can also call the VSE pattern.

After selecting the VSE pattern, touch the

[MEMO] key to copy the selected pattern to the USER pattern.

Touch the [EDIT] key to show VSE adjusting display, in which the properties of currently selected pattern can be adjusted.

By pressing the [BAND] button in BASIC pattern selecting display or USER pattern selection/memory display you can switch between the two patterns, BASIC and USER.

“CAR WIDTH”

Compensates for the width of the car’s inte- rior (lateral direction).

“DIFFUSE”

Compensates for special impression.

4.Touch the [w] or [z] key to make the ad- justment.

The adjustment range is to 1 to 10 for each time.

5.After making adjustments to a desired pat- tern by repeating the steps 3 and 4, touch the [RTN] key to change over to the BASIC/ USER pattern selection/memory display.

6.Press and hold one of [DIRECT] button for 2 seconds or longer to store the adjusted VSE pattern to the USER memory.

7.To set a title of the stored USER pattern, touch the [TITLE] key to change into the [TITLE INPUT] key.

For title inputting method, refer to the section “Entering titles”.

8.Press the [A-M] button to change into the STANDARD display.

Professional mode/P.EQ operations

P.EQ effect ON/OFF

The factory default setting is “ON”.

English

Owner’s manual

4.After the selecting, press the [A-M] button again or touch the [RTN] key two times to re- turn to the STANDARD display.

Setting and storing VSE Properties/ Memory into USER Pattern

1.Repeat the steps 1 and 2 of the previous procedure (Calling VSE BASIC Pattern/ USER pattern) to show BASIC pattern se- lecting display or USER pattern selection/ memory display.

2.Touch the [EDIT] key to show the VSE ad- justing display.

3.Select an item to be adjusted by touching [ITEM] key in the VSE adjusting display.

The VSE adjustment contents are as follows:

“CAR LENGTH”

Compensates for the length of the car‘s inte- rior (longitudinal direction).

1.Press the [A-M] button to show the AUDIO- MODE display.

2.Touch the [P.EQ ON/OFF] key to select “on” and “off”.

3.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.

4.After the setting, press the [A-M] button again or touch the [RTN] key to return to the STANDARD display.

Note:

If the P.EQ effect is set to OFF, the adjustment made in “P.EQ operations” is not reflected in the music source.

VRX835 39

Page 35
Image 35
Clarion VRX835 Calling VSE Basic Pattern/USER Pattern, Setting and storing VSE Properties/ Memory into User Pattern