DSP operations

English

Owner’s manual

Calling P.EQ BASIC Pattern/USER Pattern

1.Press the [A-M] button to show the AUDIO- MODE display.

2.Touch the [z] key to select “P.EQ BASIC” and “P.EQ USER” mode.

Touch the [P.EQ BASIC] and [P.EQ USER] key to show BASIC pattern selecting display or USER pattern selection/memory display.

3.In the pattern selecting display, touch the one of pattern key to call corresponding P.EQ pattern. In this display, pressing the No. but- ton in corresponding to the [DIRECT] key can also call the P.EQ pattern.

After selecting the P.EQ Pattern, touch the

[MEMO] key to copy the select pattern to the USER pattern.

Touch the [EDIT] key to show P.EQ adjusting display, in which the properties of currently selected pattern can be adjusted.

By pressing the [BAND] button in BASIC pattern selecting display or USER pattern selection/memory display you can switch between the two patterns, BASIC and USER.

“GAIN”

Adjust the gain (output level) in the range of - 12 dB to +12 dB. (1 dB step, 25 points)

“Q”

Set the sharpness of the Q-curve to one of the parameters: 1, 3, 5, 7 and 20.

5.After making adjustments to a desired pat- tern by repeating the operations of items 3 and 4, touch the [RTN] key to change over to the BASIC/USER pattern selection/memory display.

6.Press and hold one of [DIRECT] button for 2 seconds or longer to store the adjusted P.EQ pattern to the USER memory.

7.To set a title of the stored USER pattern, touch the [TITLE] key to change into the [TITLE INPUT] key.

For title inputting method, refer to the section “Entering titles”.

8.Press the [A-M] button to change into the STANDARD display.

4.After the selecting, press the [A-M] button again or touch the [RTN] key two times to re- turn to the STANDARD display.

Setting and storing P.EQ Properties/ Memory into USER Pattern

1.In the Basic adjustment display or in the User setting display, press the [A-M] button to show the AUDIO-MODE display.

2.Touch the [EDIT] key to show the P.EQ ad- justing display.

3.Select an item to be adjusted by touching [ITEM] key in the P.EQ adjusting display.

4.Touch the [ITEM] key to set each adjusting value.

The P.EQ adjustment contents are as fol- lows:

“FRONT/REAR”

“BAND”

Select the channel to be compensated (front or rear).

“FREQUENCY”

Select the center frequency that you want to compensate from the range of 20 Hz to 20 kHz. (1/3 octave step, 31 points)

40 VRX835

Page 36
Image 36
Clarion VRX835 Calling P.EQ Basic Pattern/USER Pattern, Gain, Band, Select the channel to be compensated front or rear