English connectionmanual Installationand Wire
■Connecting the Accessories
•Connection to the external amplifier
The external amplifier cannot be connected unless the DSP is connected. For detailed information, refer to the instruction manual of the DSP.
•Connection to the CCD camera for vehicle
The CCD camera for vehicle can be connected to the CCD terminal on the tuner amp unit. For detailed information, refer to the instruction sheet or manual for the CCD camera.
Notes:
•A power supply box (sold separately) is required for connection of the tuner amp unit and the CCD camera.
•While the CCD camera is used, the navigation cannot be turned on.
•The power supply box for camera CAA147 cannot be used. Please use the CAA188 instead.
•If the specified lead of the cellular phone is connected to the phone mute lead of the source unit, the audio mute is available when the cellular tele- phone is used.
•TV Tunner
When the TV TUNER is to be connected, connect the CeNET connector and RCA PIN (yellow). For detailed information, refer to the instruction manual of the TV TUNER.
■Connecting the parking brake lead
Connect the lead to parking brake lamp earth in the meter panel.
Notes:
• Connecting the parking brake lead to lamp earth |
allows you to watch TV/VTR/DVD video/DVD |
Parking brake lamp
+ lead to battery
Connect these three leads.
- cord parking brake signal
changer when the parking brake is engaged. |
• When the parking brake lead is not connected, |
the monitor will stay off. |
lead
Parking brake lead (bright green)
Parking brake
54 VRX835
