Sharp MD-MX10H Placing the system, Connecting the AC power lead, Demo mode, Display Demo

(Continued)

■Placing the system

10 cm (4")	10 cm (4")
10 cm (4")
	10 cm (4")

Be sure to keep space between the units for ventilation. Keep the top and the back of this unit at least 10 cm (4") away from the wall.

Note:

●Do not place the system or speakers near a television set as the magnetic fields produced may cause irregular co- lours to be displayed.

■Connecting the AC power lead

AC 230 V, 50 Hz

To AC INPUT

To an AC socket

Connect the AC power lead to the AC INPUT socket, then connect its plug to an AC socket.

Notes:

●Unplug the AC power lead from the AC socket if the unit will not be in use for a prolonged period of time.

●Never use a power lead other than the one supplied. Use of a power lead other than the one supplied may cause an electric shock or fire.

■Demo mode

DISPLAY (DEMO)

When the AC power lead is first connected, the unit will enter the demonstration mode and the words will scroll across the display continuously.

To cancel the demonstration mode:

When in the demonstration mode, press the DISPLAY (DEMO) button.

●The demonstration mode will be cancelled and the unit will be in the low power consumption mode.

Note:

●When the unit is in the low power consumption mode, the display will disappear.

7