PREPARATION FOR USE
Unplug the AC power lead from the AC socket before connecting or disconnecting any component.
■ Aerial connection |
1 |
AM loop aerial |
FM aerial |
2 |
Supplied FM aerial
Connect the FM aerial wire to the FM 75 OHMS socket and position the FM aerial wire in the direction where the strongest signal can be received.
Supplied AM loop aerial
Connect the AM loop aerial wire to the AM LOOP socket. Position the AM loop aerial for optimum reception. Place the AM loop aerial on a shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Notes:
●Do not place the aerial on the main unit as it may result in noise pickup from the internal digital electronics.
Place the aerial away from the unit for better reception.
●If the AM loop aerial and the FM aerial wire are placed near the AC power lead, interference may result.
External FM aerial
Use an external FM aerial if you require better reception. Consult your dealer.
External FM aerial
■ Speaker connection |
|
| |
Right |
|
| Left |
Red |
| Black | Red |
1 | 2 |
| 3 |
Connect each speaker wire to the SPEAKER terminals as shown.
Use speakers with an impedance of 6 ohms or more, since lower impedance speakers can damage the unit.
Notes:
●Connect the black wire to the minus
●Do not mix the right channel and left channel wiring when connecting the speakers to the unit.
●Do not let bare speaker wires touch each other as this may damage the amplifier and/or speakers.
●The speaker grille is not detachable.
6
