Sharp MD-MX10H operation manual Recording from the built-in radio onto a MiniDisc

(Continued)

■Recording from the built-in radio onto a MiniDisc

MD ■ 5

2

4

3

To stop recording:

Press the MD ■ button.

The recording will stop and the track number will be written on the MiniDisc.

To record the track number whilst recording:

The recording is performed as a single track.

To identify different sections of a recording, you can increase the track number at any point during the recording process. To create a new track number whilst in the recording mode, press the ● REC button.

●The track number will increase by one, and then the re- cording will continue.

5

MD ■

3

4

1 Tune in to the desired station (pages 17 - 18).

2 Load a recordable MiniDisc.

3 Press the ● REC button.

●The unit will enter the recording stand-by mode.

4 Check the recordable time by pressing the DISPLAY button.

Notes:

●Before recording an AM broadcast, enter the recording stand-by mode, and then separate the AM loop aerial from the main unit. Adjust it so that the AM broadcast can be tuned in most clearly.

●During recording, you cannot change the station.

5 Press the MD 06 button.

23