Sharp MD-MX10H 1,10 TIMER 3 2 MD H ENTER, Timer Operation, Timer playback/Timer recording, Memory

Models: MD-MX10H

1 40
Download 40 pages 25.26 Kb
Page 31
Image 31
TIMER OPERATION

TIMER OPERATION

IBefore setting the timer, make sure that the clock setting is correct (page 9).

6 Turn the jog dial to set the minute to start, and then press the MEMORY/ENTER button.

Timer playback/Timer recording

MEMORY/

1,10 TIMER 3 2 MD H ENTER

■Timer playback/Timer recording Jog dial 2 CD H

9

2 TUNER (BAND) 2 AUX

Before timer operation, the following preparations are required.

Load a CD, a recordable MiniDisc for timer recording.

Preset the radio station.

1 Press the ON/STAND-BY button to turn the power on. 2 (To select timer playback)

Press the CD , MD , TUNER (BAND) or AUX button.

(To select timer recording)

Press the CD , TUNER (BAND) or AUX button.

3 (To select timer playback)

Press the TIMER/DELETE button to select the timer playback mode.

1,10 TIMER 3 2 MD H ENTER Jog dial 2 CD H2 TUNER (BAND) 2 AUXPLAY

(To select timer recording)

Press the TIMER/DELETE button again to select the timer recording mode.

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundREC

4 Whilst "f PLAY" or "f REC" is flashing, press the MEMORY/ENTER button.

5 Turn the jog dial to set the hour to start, and then press the MEMORY/ENTER button.

IIf the ending time is not set manually, it will automatically be set for one hour after the starting time.

7 Turn the jog dial to set the hour to stop, then press the MEMORY/ENTER button.

8 Turn the jog dial to set the minute to stop, then press the MEMORY/ENTER button.

PLAY or

Manual backgroundREC

9 Adjust the VOLUME control for the desired volume.

Be careful not to turn the volume up too high.

10 Press the ON/STAND-BY button to enter the stand- by mode.

The TIMER indicator will light up.

11 When the timer start time is reached, timer playback or timer recording will start.

12 When the timer end time is reached, timer recording will stop.

Notes:

IThe timer cannot control the component connected to the Auxiliary input sockets.

IWhen the CD or MiniDisc is played to the end, playback will stop before the stop time.

If you wish to play to the stop time, set repeat play for the CD or MiniDisc.

Timer playback and timer recording cannot be set at the same time using the timer.

30

Page 31
Image 31
Sharp MD-MX10H 1,10 TIMER 3 2 MD H ENTER, Timer Operation, Timer playback/Timer recording, Jog dial 2 CD H, Memory