Sharp MD-MX10H Sleep operation, Simultaneous sleep and timer operation, To cancel timer operation

Models: MD-MX10H

1 40
Download 40 pages 25.26 Kb
Page 32
Image 32
To confirm the timer setting:

(Continued)

To confirm the timer setting:

Press the TIMER/DELETE button once.

The turn-on time, the turn-off time will be displayed.

To cancel timer operation:

1Whilst in the timer stand-by mode, press the ON/STAND- BY button to turn the power on.

2Press the TIMER/DELETE button repeatedly to turn off the timer, "f PLAY" or "f REC" will go out.

Caution:

In the following cases, the timer recording function will not work.

When a MiniDisc has not been inserted.

When a playback-only MiniDisc is inserted.

When the MiniDisc you inserted is protected against acci- dental erasure.

When there is no recording space left on the MiniDisc you have inserted (when the "TOC FULL" or "DISC FULL" message appears).

3 Press the SLEEP button to select the time.

(Maximum: 2 hours - Minimum: 30 minutes)

The amount of sleep time can also be changed during the sleep operation.

2 hours-30 minutes 30-minute intervals

SLEEPTo cancel timer operation:

4 The unit will enter the stand-by mode automatically after the preset sleep time has elapsed.

To cancel the sleep operation:

Press the SLEEP button repeatedly. "0:00" will appear and "SLEEP" will go out at the same time.

The sleep operation will be cancelled.

Sleep operation

SLEEP To cancel the sleep operation:■Sleep operationSLEEP To confirm the remaining sleep time:■Simultaneous sleep and timer operationManual backgroundManual background

ON/

STAND-BY Manual backgroundManual backgroundManual background

The radio, CD and MiniDisc can all be turned off automati- cally.

1 Play the desired sound source.

2 Press the SLEEP button.

SLEEPManual background

If you do not need to change the time, the unit will enter the sleep mode automatically.

To confirm the remaining sleep time:

Press the SLEEP button.

Notes:

Once the sleep time is set, it will remain the same duration until the setting is changed.

The sleep functions of this unit cannot be used to control equipment connected to this unit. You must use the sleep functions of the other equipment, if it has them.

Simultaneous sleep and timer operation

1Perform steps 1 - 9 on page 30, "Timer playback/Timer recording".

2Perform steps 1 - 3 of the "Sleep operation" on this page.

1

Timer

playback (record) setting

 

2

Sleep timer setting

Timer playback

 

 

 

(record) start time

30 minutes - 2 hours

 

Desired time

 

 

Sleep operation will

End time

 

 

automatically stop.

 

31

Page 32
Image 32
Sharp MD-MX10H Sleep operation, Simultaneous sleep and timer operation, To confirm the timer setting, Sleep On Stand-By