Sharp MD-MX10H operation manual To cancel the operation, To stop recording, Continued, Md H

(Continued)

■Recording from a CD onto a MiniDisc (One-Touch Editing)

A CD can be recorded to a MiniDisc, starting from the first track, with one-touch operation.

MD H

1

4

3

2

1 Press the ON/STAND-BY button to turn the power on.

2 Press the CD ■ button.

3 Load a CD and a recordable MiniDisc.

●The total number of tracks and the total playing time on the CD will be displayed.

4 Press the CD 0 MD EDIT START button.

0

REC

●Recording will begin, starting from the first track of CD.

●After recording (all of the tracks that can be recorded), the unit will stop automatically.

To check the remaining time available for record- ing:

1Press the MD ■ button.

2Load a MiniDisc.

3Press the DISPLAY button to find the time followed by hyphen.

●The total number of tracks previously recorded and the available remaining time will be displayed, the unit will re- turn to the original display 4 seconds later.

To cancel the operation:

Before pressing the CD 0 MD EDIT START button, press the CD ■ button.

To stop recording:

Press the MD ■ button.

●Playback and recording will stop and the track numbers will be written on the MiniDisc.

Notes:

●When the CD playing time is longer than the available MiniDisc recording time, the recording process will not start even when the CD 0 MD EDIT START button is pressed.

Total number of	Available record-
recordable tracks	ing time
(from the first track)

●To record as many tracks as are available, press the CD 0 MD EDIT START button again.

Then, when the CD 0 MD EDIT START button is pressed again, recording will start. However, when the MiniDisc runs out of space, "DISC FULL" will be displayed and the CD and MiniDisc will stop.

However, if the available recording time on the MiniDisc is less than the length of the first track on the CD, recording will not be performed.

20