![](/images/new-backgrounds/1255979/25597919x1.webp)
DMS
7005 Operating Notes
SELECT Control (5) Controls the various operating parameters of the receiver.
The SELECT control has the following functions:
LOCK Mode: • Long push: Unlocks receiver (switches to SETUP mode).
•Short push: Confirms status and warning messages.
•Turn left or right: No function.
SETUP Mode: • Long push: Locks the receiver (switches to LOCK Mode).
•Short push: Calls up the selected menu or confirms a selected setting.
•Turn left or right: Select menus or change the selected setting.
CH1 / CH2 Buttons Depending on the current menu the channel keys have different functions. (10 / 12)
LOCK Mode: • General View: Call up the channel information window.
SETUP Mode: • General View: Call up the channel information window.
•Quick Setup Menu: From the CHANNEL LIST,you can directly select and synchronize any open channel.
•Channel Menu: You can directly open a
•Audio Menu: From the GAIN, DSP,and ATTENUATIONPAD
•Rehearsal Menu: Select the displayed graph.
BACK Button (4) | A short push will close the current menu and all unconfirmed values are erased. | |
| Holding the BACK key will close all menus, all unconfirmed values are erased and the general win- | |
| dow is activated. | |
DSP Button (2) |
| |
The DSP button allows you to bypass the LOW CUT filter, EQ, COMPRESSOR, and LIMITER for each | ||
Refer to Section 9. | channel individually. | |
• | The DSP | |
Checking the Audio |
|
|
1. | To monitor the audio signal, connect headphones with a ¼”/6.3mm TRS plug to the headphones | |
Signal – Headphones CH1 |
| output (7). |
and CH2 Buttons (6) | 2. | To activate the audio output, push the headphones CH1 or CH2 button next to the headphones |
|
| socket briefly. |
| 3. | To deactivate the audio push the headphones CH1 or CH2 button for more than 1 second. |
| • | You can adjust the headphone volume with the SELECT control directly after pushing the head- |
|
| phones section CH1 or CH2 button. |
|
|
|
10