Alamo 02968915C manual Grass Flail, FML 100 Shredder

OPERATION

OPERATION

Grass Flail

•The Grass Flail head is rated for cutting grass only.

•The Grass Flail operates attached to the boom arm, and is ideal for cutting hard to reach areas where a smooth cut is required.

•Cutting height ranges from 3/4” to 4” in vegetation. Cutting height is set by adjusting the height of the roller assembly.

•When operating near the ground or when mulching be particularly careful that there are no bystanders or animals with a 100 yards. Debri tends to fly out at great speed and can

injure or even cause death. OPS-B- 0040

FML 100 Shredder

•The FML 100 Severe-Duty Shredder is designed for cutting material up to 6” in diameter and then shredding the cut debris into 3/4” diameter chips.

•It has a cutting width of 3’2”.

•Suggested cutting speed is 1st gear. Slow down for thick, dense, or hard material.

•Open the retractable hood when cutting large diameter vegetation to allow access to the cutting knives. Close the hood to cut fallen limbs into 3/4” mulch size pieces.

•When operating near the ground or when mulching be particularly careful that there are no bystanders or animals within a 100 yards. Debri tends to fly out at great speed and can injure or even cause death.

•Operate tractor in lowest gear to allow shredder time to mulch limbs. OPS-B- 0041

MACHETE BOOM 3/09 Operation Section 3-38

©2009 Alamo Group Inc.