MAINTENANCE

MOTOR & COUPLING INSTALLATION

Bolt motor to mount plate. Fully tighten bolt (Item 1).

Install flex coupler to the quick disconnect pulley hub using the countersunk socket head bolts (Item 2). Apply thread locking compound to the bolts. Tighten bolts to 45 FT-LB. Attach motor mount angle brackets, (Item 3) to the channel frame, leave bolts loose.

Insert motor shaft into flex coupling and allow motor to "find its center."

Adjust motor up as needed to provide ample clearance between the top of flex coupling and the motor. Bring angle brackets up to motor mount plate and tighten the bolts.

MACHETE BOOM 3/09

Maintenance Section 4-19

©2009 Alamo Group Inc.

MAINTENANCE

Page 165
Image 165
Alamo 02968915C manual Motor & Coupling Installation