OPERATION
MACHETE BOOM 3/09 Operation Section 3-13
©2009 Alamo Group Inc.
OPERATION
B
OO
M ARM A
SS
EMBLY
• Inspect condition of each arm se ction weldment
• Ensure all pins ar e in pla ce .
• Ensure all bolts and screws are properly
installed.
• Check condition of teflo n bushings at boom
pivot points.
• Ensure each hydraulic cylin der is insta lled and
retained correctly. Ensur e the pr op er size pin s
are used to ret ain the cylinders in place and are
secured prop erly. OPS-B- 0022
Never attempt to lubricate, adjust, or remove material from the Implement while it is in
motion or while tractor engine is running. (SG-20)
HYDRAULI
C
LINE IN
S
PE
C
TI
O
N
• Check for hydr au lic lea ks alon g ho se s,
cylinders and fittings. IMPORTANT: DO NOT
use your hands to check for oil leaks. Use a
piece of heavy paper or cardboard to check for
hydraulic oil leaks.
• Inspect the condition of the valve weldment.
• Ensure fitting is properly connected
• Inspect condition of nylon bushings.
OPS-B- 0023
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil
and fuel are explosive and their presence could present a hazard. Do
not check for leaks with your hand! High-pressure oil streams from
breaks in the line could penetrate the skin and cause tissue damage
including gangrene. To check for a hose leak, SHUT the unit ENGINE
OFF and remove all hydr aul ic p ressure. Wear oil impene trab le glo ves ,
safety glasses and use Cardboard to check for evidence of oil le aks. If
you suspect a leak, REMOVE the HOSE and have it teste d at a Dealer.
If oil does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure. (SG-15)